Milestone Instruments
Milestone Instruments
Milestone Instruments
Milestone Instruments Milestone Instruments
Milestone Instruments
Home
Homepage
Milestone Instruments Milestone Instruments Milestone Instruments Milestone Instruments Milestone Instruments
Home » Our Products » Thermal Testing Instruments

Thermal Testing Instruments

1 - 2 - 3 - 4 - 5
MI.TH-1019 Blood Bank Refregerator
Double walled construction. Inner chamber made of S.Steel & outer Mild Steel painted with white stoving enamel. S.Steel Trays to hold Blood Bags with separate acrylic door for each compartment. Temperature can be controlled up till 0°C by Electronic Digital. Temperature Controller cum indicator with an accuracy of +/-0.5°C. Built in safety audio/visual alarms such as door opening alarm, temperature fluctuation alarm, power failure alarm are provided with the controller itself. A sealed condensing unit/compressor with all accessories and fan cooled condenser are fitted at the bottom below working chamber. Inside temperature uniformity is maintained by air circulation fans. Suitable to work on 220/230 V, 50Hz. Single phase AC supply.
Capacity
a) 85 Liters. (50 blood bags)
b) 165 Liters. (100 blood bags)
c) 200 Liters. (200 blood bags)
d) 280 Liters. (250 blood bags)
Optional Accessories
Temperature chart recorder facility
Voltage Stabilizer 4 KVA




MI.TH-1020 Oribital Shaking Incubator
Double walled construction. Outer body made of Mild Steel painted with white stoving enamel. Inner chamber made of stainless with ribs to hold a tray. Shaking platform also made of S. Steel; accommodate 16 flask of 500ml. capacity temperature controlled by Digital Temp. controller cum indicator from ambient + 5 to 70ºC, with an accuracy of +/- 0.5ºC or better shaking speed can be controlled by speed regulator fitted with D.C. drive and indicated by Digital RPM meter. A stainless steel perforated tray is also provided for the use of upper portion of the chamber as a simple bacteriological incubator. An illumination lamp is also provided inside the chamber. Suitable to work on 220/230 V, 50Hz, single phase AC supply.
Chamber Size: 625 X 550 X 550 Mm (W X D X H)



MI.TH-1021 Orbital Shaking Incubator (Cooling System)
Temperature controlled by Digital Temp. Controller cum indicator 5° to 60°C, with an accuracy of +/-0.5°C or better. Temperature below ambient is maintained by a hermetically sealed compressor with complete unit placed beneath the chamber. Shaking speed can be controlled by steeples speed regulator and fitted with D.C. drive, shaking speed indicated by Digital RPM meter. A stainless steel perforated tray is also provided for the use of upper portion of the chamber as a simple bacteriological incubator. An illumination lamp is also provided inside the chamber, Illuminating system with 3nos. light with 0-24 Hrs timer is also provided to crate the day/night effect. suitable to work on 220/230 V, 50Hz. Single phase AC supply. CHAMBER SIZE: 625 X 550 X 550 MM (W x D x H)
Optional Accessories for Above Shaking Platform can also be designed as per your specifications.



MI.TH-1022 Water Bath Rectangular (Single Wall)
Single walled made of thick S/Steel complete with concentric rings. Heating elements have an automatic cut-off device. Complete with cord & plug. To work on 220/230V AC
  Chamber Size (W x H x D)
a. 300 x 250 x 100 mm (6 holes 75 mm dia)
b. 330 x 300 x 100 mm (9 holes 75 mm dia)
c. 425 x 325 x 100 mm (12 holes 75mm dia)





MI.TH-1023 Water Bath Rectangular (Double Wall)
Double walled construction. Outer body made of mild steel painted with powder coating. Inner chamber made of thick S.Steel complete with concentric rings. Temperature controlled by hydraulic thermostat from ambient to 95ºC, +/-1ºC. Complete with heating & main indicator, cord & plug but without thermometer. To work on 220/230V AC.
Size (L x B x H)
300 x 250 x 100 mm (6 holes 75 mm dia)
330 x 300 x 100 mm (9 holes 75 mm dia)
425 x 325 x 100 mm (12 holes 75mm dia)





MI.TH-1024 Cylindrical Water Bath
Single walled made of S.S. with concentric rings or double walled with temp. controlled by thermostat.
Size in mm
200 x 150 mm (dia x h)
200 x 200 mm (dia x h)



MI.TH-1025 Serological Water Bath (Without Racks & Thermometer)
Double walled inside made of stainless steel outer made of M.S. duly painted with backed enamel paint. Range 5ºC above ambient to 90°C & controlled by thermostat. Complete with mains indicator & perforated tray. Cover is provided at the top.
Inside chamber size
300 x 250 x 175 mm (2 Racks)
325 x 300 x 175 mm (4 Racks)
450 x 300 x 175 mm (6 Racks)
600 x 300 x 175 mm (8 Racks)
Optional Accessories
Digital Indicator cum controller can be fitted
Stirrer can be fitted



MI.TH-1026 Constant Temp. Refregeratred Liquid Bath (cooling bath)
Double walled construction. Outer body made of mild steel painted with white stoving enamel. Inner chamber made of stainless steel sheet. Temperature controlled by digital temperature controller cum indicator from 5 to 90ºC, with an accuracy of +/-0.5ºC or better. Temp below ambient is maintained by a hermetically sealed compressor with complete unit placed beneath the chamber. Fitted with stirrer arrangement with speed control regulator. A stainless steel lined lid with lock & key arrangement and gasket closes on the chamber to avoid temp. loss Complete with pilot lamps, cord and plug. Work in 220/230 V AC.
Size
a. 500 x 250 x 250mm
b. 250 x 250 x 250mm




MI.TH-1027 High Precision Water Bath
Double walled construction. Outer body made of mild steel painted with white stoving enamel chamber & lid made of thick stainless steel sheet. Temperature controlled by digital temperature controlled cum indicator from ambient to 95ºC, +/-0.2ºC or better. Fitted glass window on the front side & stirrer arrangement with speed control regulator. Complete with pilot lamps, cord & plug. To work on 220/230V AC. Size (L x B x H) 430 x 240 x 265 mm




MI.TH-1028 High Temperature Oil Bath
Double walled construction. Outer body made of steel painted with white stoving enamel. Inner chamber & lid made of thick S.Steel. Temperature controlled by hydraulic thermostat from ambient to 300ºC, +/-2ºC or better fitted with stirrer arrangement with speed control/regulator with pilot lamps, S.Steel Tray, cord & plug to work on 220/230V AC.
Size (W x L x D)
a) 250 x 250 x 250 mm
b) 300 x 300 x 250 mm
c) 350 x 350 x 250 mm
Optional Accessories
Digital temperature indicator cum controller




MI.TH-1029 Tissue Floatation Bath
Double walled construction. Inside and outside made of aluminum painted with attractive white stove enamel. Temperature controlled by hydraulic thermostat from ambient to 80ºC. Complete with indicator, wire and plug to work on 220/230 V AC. Size (Dia x Depth) 225 x 75 mm




MI.TH-1030 Low Temperature Bath (Incubator Shaker)
Outer body made of mild steel painted with white stoving enamel. Inner chamber made of stainless steel sheet temperature controlled by digital temperature controller cum indicator from 5 to 70ºC, with an accuracy of +/- 0.5ºC or better Temperature below ambient is maintained by a hermetically sealed compressor with complete unit placed beneath the chamber. Bath has a oscillation tray riding on roller. Speed range 40-140 cycles/per minutes controlled by geared mechanism with speed regulator. Fitted a stainless steel lined lid compete with Pilot lamps, cord & plug to plug on 220/230 V AC
Tray Size
a) 275 x 275 x 75 mm
b) 275 x 275 x 150 mm
c) 400 x 300 x 150 mm




MI.TH-1031 Water Bath Incubator Shaker (Metabolic Shaking Incubator)
Construction same as above but temperature above ambient to 90ºC & controlled by thermostat without cooling system.
Tray Size
a) 275 x 275 x 75 mm
b) 275 x 275 x 150 mm
c) 400 x 300 x 150 mm
Optional Accessories
Fitted with Digital Indicator cum controller




MI.TH-1032 Kinematic Viscometer Bath
The bath is controlled by digital temperature indicator cum controller. Temp, range above ambient to 100ºC, +/- 0.5ºC. Stirring is done by FHP electric motor stirrer. Inner chamber made of S.Steel, for front view toughened glass will be provided. Supplied with tube holder and S S cover but without viscometers.
Size (L x W x H)
a) 12" x 9" x 12" (To accommodate 4 viscometers)
b) 12" x 12" x 12" (To accommodate 6 viscometers)
c) 18" x 12" x 12" (To accommodate 8 viscometers)



MI.TH-1033 Kinematic Viscometer Bath (Temp. Range 5°c to 100°c)
Same as MI.TH-1031 but the temp. range is 5°C TO 100°C fitted with cooling system to achieve the set temp. below the Ambient.
Size (L x W x H )
a) 12" x 9" x 12" (To accommodate 4 viscometers)
b) 12" x 12" x 12" (To accommodate 6 viscometers)
c) 18" x 12" x 12" (To accommodate 8 viscometers)



MI.TH-1034 Rotatory High Vaccum Pumps
These rotary high vacuum pumps are quite-in-operating & vibration-free designed for continuous working. Factory tested to assure satisfactory performance. The pump mechanism is contained in metal case with oil level sight gauge and drain plug at base. Motor driven pumps are completely mounted on rectangular base and are furnished with V-belt. An s available in single and double stage
Capacity
Single/Double
Pump Speed
RPM
Motor HP
S-25 / D-25 450 / 450 0.25 / 0.25
S-50 / D-50 450 / 450 0.25 / 0.25
S-100 / D-100 450 / 450 0.25 / 0.50
S-150 / D-150 400 / 400 0.50 / 1.00
S-200 / D-200 400 / 400 1.00 / 1.00
S-300 / D-300 400 / 400 1.00 / 1.00
Optional accessories:
  1. Gas Blast
  2. Moisture Trap
  3. Belt Guard
  4. Non Return Valve
  5. Vacuum Gauge
  6. Vacuum Pump Oil (Per Liter)




MI.TH-1035 Monoblock Vaccum Pump (Belt Less, Portable, With Small Qty Of Oil)

Capacity Motor
45 Liter. ½ hp





MI.TH-1036 Vaccum Cum Low Pressure Pump (Diaphram Type oil free)

Capacity Motor
25 Liter ¼ HP





1 - 2 - 3 - 4 - 5


Milestone InstrumentsMilestone Instruments