MI.RO-1001 Constant Pressure System
This is a Dead-Weight type constant pressure system.
This system consists of an oil pump, continuously driven by an electric
motor to provide the required pressure to the Triaxial Cell chamber.
Capacity: 160 bar (160 kg/cm2)
MI.RO-1002 Core Cutting and Grinding Machine
This unit is designed for cutting and grinding
cylindrical rock specimen's upto NX size. The outfit includes 200 mm dia
diamond impregnated cutter, a fine diamond, impregnated grinding wheel a
water supply system and sample holder. This unit is operated on single
phase, 2 HP, AC motor.
MI.RO-1003 Rock Cutting Machine (Lab Type)
Also Know as Abrasive cut off machine
MI.RO-1004 Core Drilling Machine (Electrical
Operated)
Heavy duty, pillar type frame with continuous rated
2 HP, single phase, AC motor Varying cutting feeds provided with water-fed
swivel head to connect to suitable water supply. Provision at base for
water.
MI.RO-1005 Core Drilling Machine (Gasoline Engine
Operated)
 |
Core Drilling Machine Diesel Engine Operated
|
Heavy duty, pillar type frame with Diesel Engine
operated with 5 HP capacity Varying cutting feeds provided with water-fed
swivel head to connect to suitable water supply. Provision at base for
water.
Note: - Petrol driven engine is also available
Following Core Bits are available as options
- Core Drilling Bit, 21.46 mm dia (EX size)
- Core Drilling Bit, 30.10 mm dia (AX size)
- Core Drilling Bit, 38 mm dia
- Core Drilling Bit, 42.04 mm dia (BX size)
- Core Drilling Bit, 54.74 mm dia (NX size)
MI.RO-1006 Rock Bolt Pull Out Test
These are used to measure the working and ultimate
capacities of rock bolt anchors. Further, our products comprises of a
central hole jack, hand pump with load gauge, directional control valve and
only for central hole jacks above the capacity of 500kN, flexible pipes,
truss high tensile test rod with coupling. Moreover, the load cell can be
used for the measuring of pull out load and arrangement is provided for
fixing dial gauge for estimating deflection against the load. In addition to
this, we provide different size of adopters with the high tensile test rod.
Meets:- BS- 11309, ASTM D-4435
MI.RO-1007 Point Load Index Tester: (Hand
Operated)
Point Load Strength Index of rock cores and
irregular lumps, which may be tested without any treatment. The Point Load
Test is primarily an Index Test for strength classification of rock
materials. This instrument is mainly intended for field measurements on rock
specimen, but it can also be used in the laboratory.
Meets: - IS: 8764 -1978
MI.RO-1008 Point Load Index Tester: (Electrical
Operated)
Same as MI.RO-1007 but the it has both Hand operated
as well electrical operated
