MI.PP-1001 Centrifuge Extractor
 |
Centrifuge Extruder 3000 gram Electrical
|
It has a removable, precision machined, aluminum
rotor bowl, mounted on a vertical shaft. A filter paper disc is pressed in-
between the rotor bowl and cover plate by tightening a knurled nut. The bowl
assembly is enclosed in a housing mounted on a cast body. In the electrical
operating model, the rotor bowl is coupled to a motor. The solvent may be
introduced during test through a cup on the housing cover.
Meets:- ASTM D 2172, AASHO T-58, T-164
We offer following types of modals
- Centrifuge Extractor, Manual, capacity 1500gram
- Centrifuge Extractor, Manual, capacity 3000gram.
- Centrifuge Extractor, Electrical, capacity 1500gram.
- Centrifuge Extractor, Electrical, capacity 3000gram.
Note:- Each machine is supplied with filer paper
Extra Filter Disk for centrifuge (pack of 100)
MI.PP-1002 Ductility Testing Machine
 |
Ductility Testing Machine
|
Electrically operated and designed to test three
specimens simultaneously. The machine consists of a carriage moving over a
lead screw. An electric motor driven reduction gear unit ensures smooth
constant speed and continuous operation. The entire assembly is mounted with
a copper lined water bath completely encased in metal bound hardwood. It is
equipped with an electric pump circulator and heater. The temperature is
controlled thermostatically. Two rates of travel i.e. 5 cm/min and 1 cm/min
are provided. Suitable for operation on 230 V, 50 Hz, Single Phase, AC
supply.
Meets: - IS: 1208, ASTM D113, AASHO T 51, BS: 710,
Complete with
- Ductility Mould, with Base Plate - 3Nos.
- Thermometer IP 38C, Range: 23° C to 27° C
We offer the following type for the ductility also.
- Ductility Testing Machine, electrically Operated
Digital indicator is provided for temp. indication.
- Ductility Testing Machine, electrically Operated
It is fitted with refrigerated compressor and working temperature range
10 -30 Deg. C.
Meets: - IS-15462
- Ductility Testing Machine, electrically Operated, (Auto reverse
facility)
D.C. direct drive motor maintains constant speed, entirely
vibration-free. Speeds of 1 or 5cm per minute are selected via lever
shift on mechanical gearbox. Single brass lead screw mounted above water
level prevents agitation of water and premature rupture of specimens.
Meets: - IS-15462
Extra Accessories
- Ductility Mould Brass plate
- Ductility Mould Aluminum plate
- Elastic recovery mould Brass plate
MI.PP-1003 Marshall Apparatus
Most frequently used test by highway departments,
contractors, engineers, testing laboratories and governmental agencies is
the stability test using Marshall Apparatus. The test is intended for the
measurement of the resistance to plastic flow of cylindrical specimens of
bituminous paving mixture loaded on the lateral surface for use with hot
mixture containing asphalt or tar and aggregate up to 25.4 mm maximum sizes.
It consists of body housing, a geared screw jack and motor drive mechanism.
Load frame capacity is 50KN and rate of stain is 50.8 mm/min. Suitable for
operation on 230 V, 50 Hz, single phase, AC supply
Meets:- ASTMD 1559 BS: 598-197
MI.SO-1013 Multi Speed Universal Load frame 50 KN
This motorised machine with electronic digital
control by microprocessor is suitable to perform all the tests.
- Speed Rate:- 0.1 mm/min to 60 mm/min.
- Max. Load: - 50 KN
Meets:- BS 1377-4, ASTM D 1883, D 3668
It can be use for the following tests
- Triaxial Test for soil.
- Unconfined test for soil.
- CBR test for soil.
- Marshall test of Bituminous Products.
- Duriez test of Bituminous Products.
- Indirect Tensile of Bituminous Products.
Power Supply: 230 V Single Phase 50 Hz
Marshall Apparatusis consisting of the following.
- Load frames of any one from the above mention.
- Breaking Head Stability Mould,
- Compaction Pedestal,
- Compaction Mould Made of M. Steel, cylindrical, 100mm Dia.
- Compaction Hammer,
- Extension Rod
- Base Plate 4"
- Load Transfer Bar
Extra Accessories
Water bath for Marshall test Bath size 500 X 300 X 200 MM Digital with
stirrer
MI.RO-1004 Core Drilling Machine (Electrical
Operated)
THeavy duty, pillar type frame with continuous rated
2 HP, single phase, AC motor Varying cutting feeds provided with water-fed
swivel head to connect to suitable water supply. Provision at base for water
MI.RO-1005 Core Drilling Machine (Gasoline Engine
Operated)
 |
|
|
|
|
 |
Core Drilling Machine Diesel Engine Operated
|
Heavy duty, pillar type frame with Diesel Engine
operated with 5 HP capacity Varying cutting feeds provided with water-fed
swivel head to connect to suitable water supply. Provision at base for water
Note: - Petrol driven engine is also available
Following Core Bits are available as options:
- Core Drilling Bit, 21.46 mm dia (EX size)
- Core Drilling Bit, 30.10 mm dia (AX size)
- Core Drilling Bit, 38 mm dia
- Core Drilling Bit, 42.04 mm dia (BX size)
- Core Drilling Bit, 54.74 mm dia (NX size)
MI.PP-1004 Ring and Ball Apparatus
Heavy duty, pillar type frame with Diesel Engine
operated with 5 HP capacity Varying cutting feeds provided with water-fed
swivel head to connect to suitable water supply. Provision at base for water
Electrical heating, with a Heater and Energy Regulator, Suitable for
operation on 230 V, 50 Hz, single phase, AC supply. Each unit is supplied
with Bath of heat resistant glass
 |
| Tapered Rings |
2 Nos. |
| Ball Centring Guide |
2 Nos. |
| Steel Balls, of 9.5 mm dia |
2 Nos. |
| Ring holder |
1 No. |
| Electric Heater (Hot Plate) |
1 No. |
|
|
MI.PP-1005 Film Stripping Device
The Film Stripping device consists of a disc of
which four bottles are mounted. The disc rotated at the rate of
approximately 100 rpm A time switch is provided. Suitable for operation on
230 volts, Single phase, A.C. Supply.
MI.PP-1006 Automatic Compactor for Bituminous Mixes
- Rugged construction to withstand hard work
- Fully automatic and easy to operate
- Uniform compaction
- Automatic Blow Counter
The Automatic compactor eliminates the laborious process of manual
compaction and an even degree of compaction is achieved. The drive mechanism
lifts the weight of 4.5 kg and drops it through a correct height of 457 mm.
The rammer foot is removable, which facilitates preheating.
A compaction pedestal with specimen holder is fixed to the base. An
automatic blow counter enables the number of blows to be preset before each
test and automatically stops the machine on completion. Suitable for
operation on 230 V, 50 Hz, single phase, AC supply
